Sumo Gardener

Roughneck Bench Or Wall-Mounted Chainsaw Sharpener Review

Does your chainsaw need of a sharpening? How often do you should sharpen a chainsaw? Do you have a roughneck bench or wall-mounted chainsaw sharpener to sharpen your chainsaw?

With well maintenance, it is more durable and money-saving for you. Therefore, you should utilize a well-sharpened chainsaw, as it will sharpen the chainsaw with efficiency and in short time.

A chainsaw is made up of the cutter which is dangerous for users. However, with the use of the perfect tool, you can bring your nasty looking into shape. Well, a roughneck bench or wall-mounted chainsaw sharpener can be a blessing in disguise.

Read the guide to know how and when to sharpen your chainsaw with a roughneck bench or wall-mounted chainsaw sharpener.

Roughneck Bench or Wall-mounted Chainsaw Sharpener

Via Amazon

Why should you sharpen a chainsaw?

A chainsaw has cut and depth gauge, which decides the depth of a cut with the use of the cutter. So these parts need to sharp and effective when you chop down a tree. Therefore, you need to sharpen it whenever it wears out and becomes blunt.

The use of a blunt chainsaw is very frustrating. The chainsaw operator at times may feel fatigued and fail to provide attention on the task that he or she does. Moreover, blunt chainsaws are the main cause of accidents as they are more prone to kickbacks.

Three myths of chainsaw sharpening have been discussed in this video. You will picture why and when to sharpen your chainsaw using roughneck bench or wall-mounted chainsaw sharpener.

Signs That Tells Your Chainsaw Needs a Sharpening

If you want to make your chainsaw work perfectly, the altitude of the rakers should be less than the altitude of the cutters. You should notice the difference. When it is too small, the cutter will keep on sliding and can not make deep cuts in the woods; then the saw will turn unstable. This poses risk to a chainsaw operator. So how will you know that it is time to use your roughneck bench or wall-mounted chainsaw sharpener?

Read also: How to find a Chainsaw Sharpener

1. If you see fine saw dust

When you are cutting through wood, if the chainsaw is sharp it will produce wood chips. Otherwise, it will produce fine sawdust. Then, it is time to re-sharpen.

2. You will notice irregular cuts and chains jump

If the chainsaw is blunt, the rakers and cutters will not work well. The saw will jump, slide and bounces over the wood. The saw starts making uneven cuts. If you find your chainsaw behaving in such a manner, it is better to stop using it and choose a roughneck bench or wall-mounted chainsaw sharpener to re-sharpen it.

3. If you use a lot of energy to cut through a wood

A sharpened saw will cut through a wood like a butter knife. However, if you are putting a large amount of energy to cut through a wood, then your chainsaw needs a sharpening.

Tools to Use for Sharpening the Chainsaw

Katzco Chainsaw Sharpener File Kit

Source: Amazon

You require a round file which matches the cutter diameter or chainsaw sharpening kit. The diameters of the chain saws are 3/16, 5/32, and 7/32 inches. You can go through the manual to find your saw’s requirements and utilize the chain identification number on the drive link.

You will find charts with small engine dealers or store owners who can say you the right file diameter.

You should not use a standard rat-tail file to sharpen the chainsaw. The tapered teeth of the file can ruin your cutter’s teeth. A flat file is needed to gauge irregular rearrangement of the depth gauges.

How to sharpen the chainsaw

Sharpening Chainsaw

Source: Amazon

You need to mount the round file or roughneck bench or wall-mounted chainsaw sharpener. After that, hold the file at an angle of 30 or 35 degrees to the bar that lies horizontally. Then at a right angle position, you need to set it and start filing. You need to count the strokes and use the similar number of strokes on the cutter.


Hope you enjoy this guide.

I know how tough it is to run a blunt chainsaw and what fatigue it might cause to the operator. That's why I planned to share the tips on when and how to sharpen the chainsaw.

Is there anything else should be noticed of?

Please let me know in the comments below.

About the Author Ann Katelyn

I'm Ann Katelyn, Creator and Chief Author of Sumo Gardener. Since I was a child I've always been fascinated with plants and gardens, and as an adult this has developed into my most loved hobby. I have dedicated most of my life to gardening and started Sumo Gardener as a way to express my knowledge about gardening with the hope of helping other people's gardens thrive.

follow me on:

Leave a Comment: